SK-D molding industry ideal vacuum pump is developed based on the SK vacuum pump and according to special requirements on the plastic industry. The pump solves the problems of impossible continuous operation for pumping of a large of amount of water under working conditions, serious scale formation for hard water, failed start for long-time halt, etc. The pump can be widely applied to equipment such as tube material machines, section material machines.
■erformance Table:
| Model | Motor Power (kw) | Air Pumping Speed (M3/Min) | Limit Vacuum Degree(Mpa) | Diameter of Air Inlet/Outlet (Inch) | Weight (Kg) | Overall Dimension (Length×Width×Height) (Mm) |
| SK-2D | 4 | 2 | -0.095 | Φ50 | 113 | 668×340×360 |
| SK-3D | 5.5 | 3 | -0.095 | Φ50 | 114 | 688×340×370 |
| SK-4.5D | 7.5 | 4.5 | -0.095 | Φ66 | 150 | 802×380×385 |
| SK-6D | 11 | 6 | -0.095 | Φ66 | 198 | 845×380×425 |
